Motor Treatment Technical Information Gas Engines Recommended Mix Amounts
2 Cycle and 4 Cycle Gasoline Engines, Diesel Engines, Rotary (Wankel) Engines
The recommended concentrations of Sea Foam® Motor Treatment varies depending on the type of fuel and certain types of engines. Please consult the table below.
|
Type of Fuel |
Recommended Average Mixture |
Comments |
|
Normal gasoline grades (including 10% and 15% ethanol blends) |
1 oz. Sea Foam® Motor Treatment per gallon of gasoline |
Can mix up to 2 oz. per gallon of gasoline if necessary. Mixing at less than two-thirds oz. per gallon will impair the effectiveness of Sea Foam®. |
|
Diesel fuel (including low sulfur and ultra-low sulfur blends) |
1 oz. Sea Foam® Motor Treatment per gallon of diesel fuel |
Can mix up to 2 oz. per gallon of fuel if necessary. Mixing at less than two-thirds oz. per gallon will impair the effectiveness of Sea Foam®. |
|
For FACTORY-DESIGNED E-85 Fuel engines |
2 oz. Sea Foam® Motor Treatment per gallon of gasoline |
|
|
2-cycle, gas/oil mixed fuel engines |
2 oz. Sea Foam® Motor Treatment per gallon of gasoline |
|
Sea Foam® Motor Treatment is blended oil, and WILL NOT run a gasoline, gas/oil mix or ethanol engine without introducing HYDROCARBONS (gasoline / ethanol) to the mixture at a minimum 50%. On the other hand, a diesel engine WILL run for a short time on 100% Sea Foam® Motor Treatment.
SPECIAL NOTE FOR OIL INJECTED ENGINES: Sea Foam® Motor Treatment is ONLY added to the fuel in the above recommended concentrations. DO NOT pour Sea Foam® Motor Treatment into the oil reserve tank for oil injection!Fuel injector cleaning machines in a controlled environment use Sea Foam® Motor Treatment as their safe cleaning agent mixed with gasoline or ethanol blend at a ratio of 50% gasoline or ethanol blend & 50% Sea Foam® Motor Treatment.
Motor Treatment
