|
|
SEA FOAM MOTOR TREATMENT for Diesel
|
Diesel Applications
Excellence in Performance
- Cleans injectors
- Adds lubricity
- Anti-gel
- Cleans crankcase
- Restores power
- Removes moisture
- Cleans carbon
- Stabilizes fuel
- Diesel fuel conditioner
|
|
|
How to Use
SEA FOAM MOTOR
TREATMENT
In Tune-Up
of Diesel Engines
- Fill primary fuel filter with SEA FOAM. Be sure filter is fully
primed to prevent air locks. This will clean injectors quickly.
- Use 1 pint of SEA FOAM to every 25 gallons of
diesel fuel to add lubricity, clean fuel lines, injector pump and
remove moisture.
- Use 1 pint of SEA FOAM to every 4 gallons of oil
to clean rings and other engine parts internally. For best results,
use SEA
FOAM
for 1 hour before oil change. Results in cleaner engines and longer
oil change intervals.
When Added to Diesel Fuel Tank
- Cleans fuel injectors
- De-ices and removes
moisture
- Cleans carbon as you drive
- Diesel fuel conditioner
and anti-gel
- Lubricates upper cylinders
- Stabilizes fuel
- Adds
lubricity
One
pint treats 25 gallons of fuel.
For Anti-Gel and
De-Icer
- Use 1 pint in fuel tank to
25 gallons of diesel fuel to dry moisture and prevent gelling.
- Sea Foam will degel gelled
fuel. Start with one pint to 25 gallons of gelled fuel. More will be
needed in extreme cold weather.
- If filters are gelled, change
them and fill them with SEA FOAM.
- Use 1 pint to 25 gallons or (average of 1
ounce per gallon) to stabilize and condition fuels. One pint
stabilizes 25 gallons of regular, unleaded and diesel fuels.
- Use 1 pint to stabilize 6-12 gallons of 2
cycle (gas-oil mix) fuels (average 2 ounce per gallon).
|
