|
Common Reasons Service Technicians Use
SEA FOAM DEEP CREEP
When a penetrant and lubricant are needed
– for a multitude of uses.
Your service technician uses SEA
FOAM DEEP CREEP to penetrate
and lubricate many critical areas and items. SEA
FOAM DEEP CREEP is
even used upside down to get at difficult areas that need treating.
DEEP CREEP
is used in many of the technician’s services.
When a carbon cleaner is needed –
to spray into carburetors of all types, throttle body throats, pcv
valve or main manifold vacuum lines.
Your service technician can offer a SEA
FOAM DEEP CREEP treatment
as part of a pre-tune-up cleaning.
When air intakes need cleaning – causing
rough idles or stalls, because throttle plates are dirty.
Your service technician can offer a SEA
FOAM DEEP CREEP treatment
to safely clean the throttle plates and system.
When engine fogging is required –
to store engines for long periods of time without running them.
Your service technician can offer a SEA
FOAM DEEP CREEP treatment
to thoroughly saturate an engine internally to lubricate it and
protect it from gum, varnish and moisture problems. He can perform
this service or show you how to do it yourself with SEA
FOAM DEEP CREEP.
When air tools need to be lubricated, cleaned
and moisture removed – this should
be done on a daily basis.
Your service technician can offer a SEA
FOAM DEEP CREEP treatment
to lubricate and remove the moisture from air tools on a daily
basis. This treatment insures the longevity of the tools. He can
service your air tools or show you how to do it yourself with
SEA FOAM DEEP CREEP.
When a moisture disperser is needed –
to disperse moisture.
Your service technician can use SEA
FOAM DEEP CREEP to disperse moisture
off metal parts and surfaces. It is used on wet engine parts,
bolts, clamps, etc. to lubricate and keep from rusting. This service
is performed when needed.
When a door lock lube & de-icer is needed
– to lube & de-ice locks.
Your service technician can offer a treatment
of SEA FOAM DEEP CREEP
to spray into frozen or corroded locks to dry, melt ice and lubricate
or show you how to do it yourself with SEA
FOAM DEEP CREEP.
When a starting spray with lube is needed
– for hard starting engines of all
types. For best starting results, deep creep must be kept at room
temperature to be effective in cold weather.
Your service technician offers a SEA
FOAM DEEP CREEP starting service
or can instruct you on a do it yourself process using SEA
FOAM DEEP CREEP.
When a gun cleaner and oil is needed –
this is one example of the many uses
of SEA FOAM DEEP CREEP
for do-it-yourselfers.
DEEP CREEP
cleans, dries moisture, dissolves buildup of gun powder and lubricates
parts with only one application.
|
